Chris Burleson: NMRA Super Street
Outlaw - Turbo Mustang
Redesign Of The Turbo System
Install Smooth Nose Front Bumper
AMS 1000 Boost Controller
Fabricate Chute
Mount & Release Handle
Install Wing &
Lightweight Trunk Lid
~Updates at bottom of page~
|
|
|
|
|
|
|
NMRA SSO Turbo Mustang (A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Some of the wiring had to be cleaned up. |
|
|
|
|
|
|
|
|
|
|
|
Dash mounting/plate made for the AMS 1000 Boost Controller (A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Before we could start on the turbo system the frame/sheetmetal had to be cleaned up from the previous owner (A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Starting on the turbo system: Turbo will be front mount-Grill- instead of off to the side (A) |
|
|
|
|
|
|
|
|
|
|
|
(B) Turbo placement mock up. |
|
|
|
|
|
|
|
|
|
|
|
Turbo mounted. Starting on the crossover, ducting (A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alum. dump pipe/O2 bung (A) |
|
|
|
|
|
|
|
|
|
|
|
|
Wastegate & wastegate zoomie |
|
|
|
|
|
|
|
|
|
|
|
|
Wheels back from being beadlocked & the 28/10.5/15 slicks mounted. |
|
|
|
|
|
|
|
|
|
|
|
Carbon fiber smooth nose: getting the grill area cut out, headlights mounted, and the bumper mounted..... 13lb Lost. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radiator mounted & plumbed. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Turbo/exhaust cross over welded |
|
|
|
|
|
|
|
|
|
|
|
Ready to head to the track for some License passes (A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove old chute mounting & fabricate something a little stronger (A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.jpg)
