First thing that had to go was the front bumper/support.

Starting to mock up turbo placement (A).

(B). We are going to try and keep alot of the plumbing hidden so the engine bay still looks clean (less tubing running everywhere).

Getting the turbo mounted. (A) The turbo ended up high enough that we will not need a pump to help with drain back.

(B). This is a Bridge Racing bolt in piece. (Please phone for pricing).

(C) The radiator will still be mounted in the factory location, it will just be a bit taller and not quite as wide.

(D) In DR trim the turbo will get air from above & below the bumper. When playing around in SSO we will have a second bumper with a hole/scoop in it:)

Precision PT-3000 intercooler has shown.

Getting ready to start on the headers/hot side.

Whats left once the headers were done.

Passenger side header (A)

(B)

(C)

Drivers side header (A)

(B)

(C)

(D)

Passenger Side Header Finished & Welded (A)

(B)

(C)

(D)

Welding almost finished on the drivers side header.

Intercooler Mounting (A)

(B)

Cold side plumbing (A)

(B)

(C)

(D)

(E)

(F)

Hot side, crossover, etc. (A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

(J)

Dump Pipe (A)

(B)

(C)

(D)

Double wall blow off valve mounting (A).

(B)

(C)

HKS Wastegate mounted (A)

(B)

Throttle body being mounted (A)

(B)

Cold side tubing welded.